Heavy Duty Oil Transfer Pump
GPI ® Heavy Duty Oil Pump Series
Recommended for use with these fuels:
Hydraulic Fluid | Anti-Freeze | Up to 30W Oil Up to 90W Oil | Hydraulic Fluid | Anti-Freeze Up to 90W Oil | Hydraulic Fluid | Anti-FreezeThe GPI L-Series oil pump is ideal for use with new oil (up to 90 wt.), hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. It features a gerotor gear design and durable, lightweight cast aluminum housing. With a rugged 12-volt (dc) delivering flow rates up to 20 QPM (19 L/min.), or 115-/230-volt (ac) motor delivering flow rates up to 32 QPM (30 L/min.), it is engineered for long life and limited maintenance. The L-Series pump has a ball valve nozzle, an 8-ft. (2.5 m) dispensing hose, a telescoping suction pipe to fit tank depths between 15 and 40 in., and a factory-installed power cord.
Features & Benefits
- Thermally protected 0.4 HP motor is designed for long life and limited maintenance
- Specifically designed for use with medium viscosity fluids. NOT FOR USE WITH FUEL
- Weight-centering inlet base reduces tank stress and includes an easy-access strainer to protect pump from debris
- Wetted materials: aluminum, stainless steel, brass, steel, nitrile rubber & zinc plated steel
- Equipped with Safe Stop. 30 minute auto power down with easy reset protects motor
- Motor is cULus Listed. 1-yr warranty
- Thermally protected 0.5 HP motor is designed for long life and limited maintenance
- Specifically designed for use with high viscosity fluids
- Thermal limiting motor protection extends motor life
- Weight-centering inlet base reduces tank stress and includes an easy-access strainer to protect pump from debris
- Pre-installed power cord greatly reduces assembly and installation time
- Use in ordinary locations only. Not for outdoor or hazardous locations
- Wetted materials: aluminum, stainless steel, brass, steel, nitrile rubber & zinc plated steel
- Motor is UL recognized component and CSA approved. 1-yr warranty
- Thermally protected 1 HP motor is designed for long life and limited maintenance
- Specifically designed for use with high viscosity fluids
- Thermal limiting motor protection extends motor life
- Weight-centering inlet base reduces tank stress and includes an easy-access strainer to protect pump from debris
- Pre-installed power cord greatly reduces assembly and installation time
- Use in ordinary locations only. Not for outdoor or hazardous locations
- Wetted materials: aluminum, stainless steel, brass, steel, nitrile rubber & zinc plated steel
- Motor is UL recognized component and CSA approved. 1-yr warranty
Specifications
- Input:
- 12V (DC)
- Fuse:
- 40 amps
- Type:
- Gerotor
- Motor RPMs:
- 1800
- Motor HP:
- 0.40
- Flow Rate:
- 20 QPM/5 GPM (19 L/min)
- Duty Cycle:
- 30 min on/30 min off
- Working Pressure:
- 50 PSI (3.45 bar)
- Max Working Temperature:
- See Viscosity Chart for Operating Temperature Range
- Wetted Materials:
- Aluminum|Stainless Steel|Zinc Plated Steel|Brass|NBR (Nitrile Butadiene Rubber)|Steel
- Inlet:
- 1 in. FNPT
- Outlet:
- 3/4 in. FNPT
- Mounting Type:
- Center Base, 2in. MNPT
- Suction Pipe:
- Polypropylene, Telescoping 15 to 40in. x 1in. MNPT
- Power Cord:
- 18 ft. (5.5m), 10/2 AWG, Factory Installed
- Dispensing Hose:
- 8 ft. (2.44 m) x 3/4 in.
- Nozzle:
- Spout, Thermoplastic
- Housing:
- Corrosion-Resistant Aluminum
- Warranty:
- 1-yr
- UPC:
- 31401011692
- Approvals:
- cULus Motor Listed for Hazardous Locations Class I, Division 2, Group D USA and Canada
- Input:
- 115/230V (AC)
- Fuse:
- N/A
- Type:
- Gerotor
- Motor RPMs:
- 1725
- Motor HP:
- 1/2
- Flow Rate:
- 16 QPM/4 GPM (15 L/min)
- Duty Cycle:
- 30 min on/30 min off
- Working Pressure:
- 50 PSI (3.45 bar)
- Max Working Temperature:
- See Viscosity Chart for Operating Temperature Range
- Wetted Materials:
- Aluminum|Stainless Steel|Zinc Plated Steel|Brass|NBR (Nitrile Butadiene Rubber)|Steel
- Inlet:
- 1 in. FNPT
- Outlet:
- 3/4 in. FNPT
- Mounting Type:
- Center Base, 2in. MNPT
- Suction Pipe:
- Polypropylene, Telescoping 15 to 40in. x 1in. MNPT
- Power Cord:
- 3 ft. (.91 m)
- Dispensing Hose:
- 8 ft. (2.44 m) x 3/4 in.
- Nozzle:
- Spout, Thermoplastic
- Housing:
- Corrosion-Resistant Aluminum
- Warranty:
- 1-yr
- UPC:
- 031401000214
- Approvals:
- Motor UL Recognized Component|CSA Certified Motor
- Input:
- 115/230V (AC)
- Fuse:
- N/A
- Type:
- Gerotor
- Motor RPMs:
- 3450
- Motor HP:
- 1
- Flow Rate:
- 32 QPM/8 GPM (30 L/min)
- Duty Cycle:
- 30 min on/30 min off
- Working Pressure:
- 50 PSI (3.45 bar)
- Max Working Temperature:
- See Viscosity Chart for Operating Temperature Range
- Wetted Materials:
- Aluminum|Stainless Steel|Zinc Plated Steel|Brass|NBR (Nitrile Butadiene Rubber)|Steel
- Inlet:
- 1 in. FNPT
- Outlet:
- 3/4 in. FNPT
- Mounting Type:
- Center Base, 2in. MNPT
- Suction Pipe:
- Polypropylene, Telescoping 15 to 40in. x 1in. MNPT
- Power Cord:
- 3 ft. (.91 m)
- Dispensing Hose:
- 8 ft. (2.44 m) x 3/4 in.
- Nozzle:
- Spout, Thermoplastic
- Housing:
- Corrosion-Resistant Aluminum
- Warranty:
- 1-yr
- UPC:
- 031401000221
- Approvals:
- Motor UL Recognized Component|CSA Certified Motor